presents
|
|
The cableconnections should be arranged by an experienced
electrician to guarantee a full protection from oxidation.
All power supplying cables must be laid in the sandbed before paving. The open ends should be located right where you plan the lighting stone placed. Please use cable suitable for "in earth" only! Take care that the luminous paving-stones get no direct contact with the other stones around of them and the cable from the Wisdom must be placed vertical in the ground. The work on the Wisdom is possible by hand only, it is not constructed to bear hard mechanical power from different mashines used for flatten the ready paving. To give static resistance to the LED paving-stones they must be paved in bed of cement (also the gaps two or three rows around). After that work is done you can walk over, drive over with light weight vehicles (limousine) and you already created an anit-theft device with it. |
cableconstruction for installation. |
The lightstones are fully weatherproofed. In addition to the fact that the chip with LED is embedded in the resin, the cable is inserted through an IP68 adaptor to enhance protection against capillar-water. LED producers predict a "half-life period" of the Wisdom´s LED from 80.000-100.000 hours. The LED is not broken after that but it looses 50% of the lighting power when expired. Power supply of the undemanding Wisdom is very simple. A shrewd electronic provides optimal power to the LED always. The Wisdom sett-stone offers its full lighting strength inbetween 5 - 12 V very reliable. |
material: polyesterresin | DIN | unit | value |
toughness stroke | 53 453 | kJ/m² | 8 |
toughness bend | EN 63 | Mpa | 90 |
stretch / fructure | EN 61 | % | 2,5 |
resistance temperature ISO 75/A | 53 461 | °C | 70 |
tightness at 20 °C | 53 479 | g/cm³ | 1,22 |
water admittance after 7 d/20 °C | --- | % | 0,4 |
Lightsource : SMD (Chip) LED
.
operating temperature | °C | -40 bis +80 |
consumption | mA | max. 20 |
current power | V/DC | 12 |
Safety class IP68 comply with DIN EN 60 529 (VDE 0470-1)
Correspond with general requirements of DIN EN 60598-1
-5m
transformer (plug), inside use:
Input: 230 Vac, 50 Hz Output: 12 Vdc, 0,25 A, 3 VA |
transformer, exterior use (IP 65):
Input: 230 Vac, 50-60 Hz Output: 12 Vdc, 2,6 VA ta 40/E, DIN EN 60 742 (VDE 0551) |
|
|||
MoKi Home (engl.) | Pricelist (engl.) | Orderform (engl.) |
|
. |
|||
WISDOM English! | Startseite | WISDOM NEU! (german) | Bookstore |